ho questo errore
root@voyage:~# wget --no-check-certificate https://github.com/marcoc1712/squeez....4-(R2).tar.gz
-bash: syntax error near unexpected token `('
ho questo errore
root@voyage:~# wget --no-check-certificate https://github.com/marcoc1712/squeez....4-(R2).tar.gz
-bash: syntax error near unexpected token `('
Clearaudio Emotion + Satisfy + Grado Gold1 > Phono D3A DIY
Futro S450 + Daphile / Amanero + Buffalo 2 (trident) uscita a TU Cinemag 15/15B DIY / Jlsounds + Lector Digicode TDA1541 S1
Monoblocchi D3A 2A3 (electrolytich free!!) DIY / Coral Beta8 in BLH DIY
grazie, ha funzionato. ...ma sono fermo di nuovo :-)
Saving to: `v1.8.4-(R2).tar.gz'
[ <=> ] 35,100,400 1.21M/s in 29s
2017-03-26 07:10:59 (1.17 MB/s) - `v1.8.4-(R2).tar.gz' saved [35100400]
root@voyage:~# tar -zxvf squeezelite-R2-1.8.4-R2-.tar.gz
tar (child): squeezelite-R2-1.8.4-R2-.tar.gz: Cannot open: No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
root@voyage:~#
Clearaudio Emotion + Satisfy + Grado Gold1 > Phono D3A DIY
Futro S450 + Daphile / Amanero + Buffalo 2 (trident) uscita a TU Cinemag 15/15B DIY / Jlsounds + Lector Digicode TDA1541 S1
Monoblocchi D3A 2A3 (electrolytich free!!) DIY / Coral Beta8 in BLH DIY
non va
root@voyage:~# tar -zxvf v1.8.4-(R2).tar.gz
-bash: syntax error near unexpected token `('
root@voyage:~# ls -l
total 35137
drwxrwxr-x 5 root root 1024 Mar 20 20:18 falcon
-rw-r--r-- 1 root root 361806 Mar 25 15:41 falcon.tar
-rw-r--r-- 1 root root 361949 Mar 25 15:41 master.tar.gz
-rwxr-xr-x 1 root root 8781 Mar 24 22:49 setup.pl
-rw-r--r-- 1 root root 35100400 Mar 26 07:10 v1.8.4-(R2).tar.gz
root@voyage:~#
Ultima modifica di DacPassion : 26-03-2017 a 09:46
Clearaudio Emotion + Satisfy + Grado Gold1 > Phono D3A DIY
Futro S450 + Daphile / Amanero + Buffalo 2 (trident) uscita a TU Cinemag 15/15B DIY / Jlsounds + Lector Digicode TDA1541 S1
Monoblocchi D3A 2A3 (electrolytich free!!) DIY / Coral Beta8 in BLH DIY
si é lo stesso problema di prima le parentesi..scusa...
tar -zxvf 'v1.8.4-(R2).tar.gz'
troverai una directory con questo nome squeezelite-R2-1.8.4-R2-
cd squeezelite-R2-1.8.4-R2-
e ci sarai dentro...
make -f Makefile.debian
posta l´output
se qualcosa non va é perché probabilmente hai bisogno di queste:
apt-get install build-essential libasound2 libasound2-dev libflac-dev libmad0-dev libfaad-dev libmpg123-dev
PS: io sarei andato direttamente con il binario...
https://github.com/marcoc1712/squeez...te-R2-deb-i386
Ma probabilmente Marco vuole verificare la compilazione...
Ultima modifica di antonellocaroli : 26-03-2017 a 10:04
edit errore risolto ...per ora
Ultima modifica di DacPassion : 26-03-2017 a 10:36
Clearaudio Emotion + Satisfy + Grado Gold1 > Phono D3A DIY
Futro S450 + Daphile / Amanero + Buffalo 2 (trident) uscita a TU Cinemag 15/15B DIY / Jlsounds + Lector Digicode TDA1541 S1
Monoblocchi D3A 2A3 (electrolytich free!!) DIY / Coral Beta8 in BLH DIY
Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)