Intel Rapid Storage Technology Version 9.6.4.1002 WHQL

[brugola.x]

Ho scovato in rete questi driver.. sul sito ufficiale non c'è ancora nulla ma se li volete provare..




Intel Rapid Storage Technology Version 9.6.4.1002 WHQL

INFORMAZIONI

Data rilascio: 08/06/2010
Certificazione WHQL: si del 19/06/2010
Sistemi operativi supportati: Windows 200x/Xp/Vista/ & Windows 7 32/64bits


Controller RAID :

*PNP0600.DeviceDesc = "Intel RAID Controller"
PCI\VEN_8086&DEV_2682&CC_0104.DeviceDesc = "Intel(R) ESB2 SATA RAID Controller"
PCI\VEN_8086&DEV_27C3&CC_0104.DeviceDesc = "Intel(R) ICH7R/DH SATA RAID Controller"
PCI\VEN_8086&DEV_27C6&CC_0104.DeviceDesc = "Intel(R) ICH7MDH SATA RAID Controller"
PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc = "Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller"
PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc = "Intel(R) ICH8M-E/ICH9M-E/5 Series SATA RAID Controller"

Controller AHCI :
DiskName = "Intel Rapid Storage Technology Driver"
*PNP0600.DeviceDesc = "Intel AHCI Controller"
PCI\VEN_8086&DEV_2681&CC_0106.DeviceDesc = "Intel(R) ESB2 SATA AHCI Controller"
PCI\VEN_8086&DEV_27C1&CC_0106.DeviceDesc = "Intel(R) ICH7R/DH SATA AHCI Controller"
PCI\VEN_8086&DEV_27C5&CC_0106.DeviceDesc = "Intel(R) ICH7M/MDH SATA AHCI Controller"
PCI\VEN_8086&DEV_2821&CC_0106.DeviceDesc = "Intel(R) ICH8R/DH/DO SATA AHCI Controller"
PCI\VEN_8086&DEV_2829&CC_0106.DeviceDesc = "Intel(R) ICH8M-E/M SATA AHCI Controller"
PCI\VEN_8086&DEV_2922&CC_0106.DeviceDesc = "Intel(R) ICH9R/DO/DH SATA AHCI Controller"
PCI\VEN_8086&DEV_2929&CC_0106.DeviceDesc = "Intel(R) ICH9M-E/M SATA AHCI Controller"
PCI\VEN_8086&DEV_3A02&CC_0106.DeviceDesc = "Intel(R) ICH10D/DO SATA AHCI Controller"
PCI\VEN_8086&DEV_3A22&CC_0106.DeviceDesc = "Intel(R) ICH10R SATA AHCI Controller"
PCI\VEN_8086&DEV_3B29&CC_0106.DeviceDesc = "Intel(R) 5 Series 4 Port SATA AHCI Controller"
PCI\VEN_8086&DEV_3B2F&CC_0106.DeviceDesc = "Intel(R) 5 Series 6 Port SATA AHCI Controller"
PCI\VEN_8086&DEV_3B22&CC_0106.DeviceDesc = "Intel(R) 5 Series/3400 Series SATA AHCI Controlle


Release note Version 9.6.4.1002:

(1) Power cycle S3(Sleep) causes BSOD 0x9086 Windows XP-64, Win7-64 (le retour de la la mise en veuille peut causer un ecran bleu sous Windows Xp & 7 64bits)

(2) Can't Boot Windows Server 2008 R2 x64 with Intel RAID and Hyper-threading enabled on Nehalem Ex system Windows 2008-64 (le systeme risque de ne pas pouvoir démarrer avec Windows Server 2008 R2 x64 avec Intel RAID et Hyper-Threading activé )

(3) Noise occurs when HDD Sleep command (0xE0) is issued while playing a music file Win7 (Un bruit se produit lorsque un HDD et en mode veuille (0xE0) lors de la lecture un fichier de musique sous Win7)

(4) CSMI commands are being cached Windows XP, Vista, Vista-64, Win7, Win7-64 (CSMI commandes sont mises en cache sous Windows XP, Vista, Vista-64, Win7, Win7-64)

(5) Using CSMI to monitor RAID disk with SMART event returns CSMI_SAS_DRIVE_STATUS_OK instead of _DEGRADED Windows XP (L'utilisation du monitor Raid avec l'option Smart Event affiche l'etat OK au lieu DEGRADED sous Windows XP)

(6) OS hangs with 0x7A BSOD during S4 cycling test Vista, Win7, Win7-64 (OS se bloque avec ecran bleu lors du cycle S4 sous Vista, Win7, Win7-64)

(7) SGPIO: Activate LED not working properly after a RAID 10 rebuild. Windows 2003, Windows 2008, Windows 2008-64 (SGPIO: Activation de la LED ne fonctionne pas correctement après une reconstruction RAID 10 sous Windows 2003, Windows 2008, Windows 2008-64)

(9) The USB transfer rate downgrades when querying for a SMART event on a drive Win7, Win7-64 (Le taux de transfert USB peut baisser lors de l'interrogation d'un événement SMART sur un disque sous Win7, Win7-64)

download driver da intel drivers pour Raid/Sata/Ata/Ahci

[Dream Theater]

Ottimo,mi serviva quel punto1,spero escano presto in versione "ufficiale",ho bisogno di finire il mosaico del mio sistema(e molti punti sono troppo instabili per i miei gusti)!