Intervista al fondatore di PC Power&Cooling - [NEWS]

Visualizzazione dei risultati da 1 a 5 su 5
  1. #1
    Nexthardware Staff L'avatar di Chicco85
    Registrato
    Oct 2005
    Località
    Verona
    Età
    39
    Messaggi
    7,546
    configurazione

    Predefinito Anandtech ha condotto un intervista con Doug Dodson.


    Gli spunti che si possono trarre dall'articolo sono molti, ma lasciamo alla discrezione del lettore la valutazione di quelli che egli considera più significativi.


    Per leggere l'intervista, basterà seguire il link in calce alla news.




  2. #2
    Nexthardware Staff L'avatar di Chicco85
    Registrato
    Oct 2005
    Località
    Verona
    Età
    39
    Messaggi
    7,546
    configurazione

    Predefinito

    Ma questo è un grande...

    Speaking of PSU Myths published on your website, what is your opinion about modular cables today since you found them unstable? The fact is that most of the users want modular cables just to be free to remove them when they're not needed.


    DD: Just because users like them doesn't make them good. The fact is that with lower wattage consumer PSUs you can probably get away using cable management because the voltage losses are relatively minor and reliability isn't critical. With higher end power supplies above 800W, it would be careless to use such a design because the voltage drop through the connectors is significant and the applications tend to be mission critical.



    That sounds reasonable. This is also for example how the single 12V rail got into place. Why exactly is one 12V rail better than separate rails, and why is this not a safety issue for the user?

    DD: One 12V rail is better because all of the power supply's capacity is available to the system. With a multi-rail 12V design, as much as 30% of the PSU's capacity can be trapped on under-utilized rails. For example, if one 12V rail rated at 18A is for the CPU, and the CPU only draws 8A, the remaining 10A cannot be utilized by other components in the system.


    Ecc...


    Ecco come si fanno gli alimentatori...

  3. #3
    exbibyte L'avatar di wasky
    Registrato
    May 2004
    Località
    Roma Vittoriosa
    Età
    61
    Messaggi
    11,739
    configurazione

    Predefinito

    Originariamente inviato da Chicco85

    DD: One 12V rail is better because all of the power supply's capacity is available to the system. With a multi-rail 12V design, as much as 30% of the PSU's capacity can be trapped on under-utilized rails. For example, if one 12V rail rated at 18A is for the CPU, and the CPU only draws 8A, the remaining 10A cannot be utilized by other components in the system.


    Ecc...


    Ecco come si fanno gli alimentatori...
    Io è una vita che lo dico

    Non facciamoci sentire da chi se ne fà una ragione potrebbero offendersi



    wasky

    In a Audio Computer Transport, Parameters like RAM settings, RAM quality and motherboard traffic all make a perceptible difference. The purity with which data is streamed to the DAC is critical. Cics

  4. #4
    Nexthardware Staff L'avatar di CrAzY MoDdEr
    Registrato
    May 2006
    Località
    Milano
    Età
    35
    Messaggi
    6,245
    configurazione

    Predefinito

    Originariamente inviato da Chicco85
    DD: Just because users like them doesn't make them good.
    lo amo solo per questa frase .....


    Get Rich or Die Tryin'

  5. #5
    Super Moderatore L'avatar di frakka
    Registrato
    May 2001
    Località
    Casalecchio di Reno (Bo)
    Età
    44
    Messaggi
    23,431
    configurazione

    Predefinito

    Ho letto solo quello che chicco ha quotato. Come non essere d'accordo in toto!!!

    Questa è la storia di 4 persone chiamate Ognuno, Qualcuno, Ciascuno e Nessuno. C'era un lavoro importante da fare e Ognuno era sicuro che Qualcuno lo avrebbe fatto. Ciascuno poteva farlo, ma Nessuno lo fece, Qualcuno si arrabbiò perché era il lavoro di Ognuno. Ognuno pensò che Ciascuno potesse farlo, ma Ognuno capì che Nessuno l'avrebbe fatto. Finì che Ognuno incolpò Qualcuno perché Nessuno fece ciò che Ciascuno avrebbe potuto fare.

Informazioni Thread

Users Browsing this Thread

Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)

Discussioni simili

  1. Risposte: 0
    Ultimo messaggio: 05-05-2010, 10:16
  2. PC Power & Cooling presenta il Silencer 910 - [NEWS]
    By pippo369 in forum -= Hardware generico =-
    Risposte: 2
    Ultimo messaggio: 28-04-2009, 14:42
  3. PC Power & Cooling presenta l'UPS Pro-Source 1500VA - [NEWS]
    By pippo369 in forum -= Hardware generico =-
    Risposte: 1
    Ultimo messaggio: 07-04-2009, 11:50
  4. PC Power&Cooling Turbocool 860 - [NEWS]
    By Chicco85 in forum -= Hardware generico =-
    Risposte: 7
    Ultimo messaggio: 07-02-2008, 10:19
  5. PC Power&Cooling 1200 Watt - [NEWS]
    By Chicco85 in forum -= Hardware generico =-
    Risposte: 0
    Ultimo messaggio: 04-10-2007, 00:00

Tags

Regole d'invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
nexthardware.com - © 2002-2022