Abit kt7E ?Qualcuno sa qualcosa?

[Ripper]

Ho letto dell'uscita in giappone della nuova abit.
Qualcuno sa qualcosa di questo nuovo chipset?
E' bellissima da vedere...

[Aiace]

Se esce una scheda nuova... caleranno i prezzi di quelle vecchie!
Secondo voi quand'è il momento giusto per comprare hw??
:p :p :p

[Ripper]

L'hw devi comprarlo quando ti gira perchè se aspetti sempre non compri mai nulla dato che i prodotti si susseguono troppo velocemente per prevedere di tenere la configurazione di partenza per + di un anno.

[frenc]

e' l'utilita' ad essere importante nell'acquisto. posso cambiare la scheda dopo soli due mesi, se ritengo ne valga la pena, o tenerla per quasi un anno. depende.
e cmq e' sempre meglio aspettare un po' dall'uscita, per verificare eventuali problemi della stessa.

.

[Uragano Frenk]

Mi sembra cmq che si tratti di una scheda video economico di Abit, infatti dovrebbe avere il bus a 200 Mhz

[frenc]

dal sito della abit:

---
ABIT Introduces the KT7E

Taipei, Taiwan, R.O.C. Tuesday, March 27, 2001— ABIT is proud to announce the launch of the KT7E. This newest AMD-based motherboard is based on VIA’s KT133E chipset. The KT7E is an ATX form-factor mainboard designed for use with all AMD-K7 “Socket A” 200MHz FSB processors, including “Thunderbirds” as well as “Durons.” It supports all normal industry standard functions, including Advanced Configuration and Power Management Interface (ACPI), AGP 1X/2X/4X and 100/133MHz SDRAM Memory Bus Settings. The KT7E features three 168-pin DIMM sockets supporting PC100/PC133 SDRAM modules and Suspend-To-RAM (STR).

ATA/100
The KT7E includes VIA’s 686B chipset, allowing for ATA/100 support. Ultra ATA/100, or Ultra DMA/100 is an extension of the current Ultra ATA/33 interface. This new high-speed interface has a 100 Mbytes/sec transfer rate and maximized disk performance under the current PCI local bus environment.

3-Phase Power Solution & Active Cooling

The last thing you need in your system is excess heat, or the stability and CPU lifespan issues that go with it. On the KT7E, ABIT has gone a step further in preventing extra heat: A six MOSFE transistor set for a “3-Phase Power Solution.” These six transistors dissipate heat more effectively than the four transistor (“2-Phase”) solution found on most other Socket A motherboards. Additionally, should future Thunderbirds require higher amperage, the KT7E will address power and heat issues better than boards with 2-phase solutions. In order to ensure maximum cooling, ABIT goes even further than the 3-Phase Power Solution. The KT7E also adds active cooling to the Northbridge. ABIT feels that for optimum stability, the Active Cooling is needed for the hot-running, VIA Northbridge.

SoftMenu™ III
Only ABIT has Soft Menu™, and on the KT7E, you will find ABIT’s unique SoftMenu™ III for AMD processors. The KT7E’s SoftMenu™ III has special added features and functions that will allow the maximum performance and enhancement tweaks specifically for Athlon based CPUs, such as FSB settings from 100MHz to 183MHz in increments of 1 (84 settings). Moreover, ABIT has added CPU Multiplier Factor Adjustments, allowing the user to choose the proper multiplier factor*. The System BIOS features and supports Award Plug and Play BIOS and Write-Protect Anti-Virus function by AWARD BIOS.

Multi I/O Functions
The inclusion of 6 PCI slots and 1 ISA slot allow for maximum upgradeability. ABIT has added the sixth PCI slot to make the KT7E the most expandable and upgradeable board in its class. In addition to the normal serial and parallel ports the KT7E has 2 USB ports, plus an extra header for 2 extra USB channels. Miscellaneous features include hardware monitoring, built-in Wake on LAN, Wake on Ring, and IrDA TX/RX headers. CPU temperature monitoring is performed by a thermistor located directly below the processor.
---

purtroppo non ho trovato schede tecniche .

.