Specifications
• NVIDIA™ SLI™ - ready certified
• 80PLUS® Bronze Certified - 85% or more efficiency at 20%, 50%, and 100% load
• Designed to support multiple GPUs and multi-core CPUs
• Six 12V output circuits and DC to DC Voltage Regulator Modules ensure supreme system stability
• 80mm cooling fan uses Pulse Width Modulation for whisper-quiet operation
• Advanced sleeved cable management improves airflow and reduces clutter
• Gold plated connectors for superior conductivity
• Industrial grade protection circuitry prevents damage resulting from short circuits (SCP), over voltages (OVP), and over current (OCP), Under Voltage Protection (UVP)
• Universal Input and Active PFC allow the Quattro to operate efficiently on any power grid in the world
• Operating Temperature:
• Approvals: UL, CUL, FCC, TTüVV, CE, C-tick, CCC, CB, BSMI
• Unit Dimensions:
- 3.4" (H) x 5.9" (W) x 7.9" (D)
- 86mm (H) x 150mm (W) x 200mm (D)
• Package Dimensions:
- 9.4" (H) x 12.4" (W) x 5.3" (D)
- 240mm (H) x 315mm (W) x 135mm (D)
• Net Weight: 6.5 lbs / 2.72 kg
• Gross Weight: 10.0 lbs / 4.53 kg
Questa modello non sarà in vendita date le caratteristiche molto particolari.
La versione commerciale ( Standard) sarà invece disponibile a breve con la solita qualità Antec
Shamino says :
Paper specs which i dont care much for... 6 +12v 'rails' speced at 38A each - I think OCP is at 50A each, I think it's 2 modules cut into 3 each by OCP setting, but 50A is a lot for an output bunch of lines
Each pcie connector is a 6+2 split with 6,
which contains capacitor inside for +12v, 2200UF for each cpu line and pcie connector line, placed near to end so that you dont droop much during sudden draws as current travels along the lines. thats what i asked for in a psu before.even molex has capacitor, 220uf
12x 6pin pcie connectors (via 6 REAL Lines) at 2200UFx6 - 13,200UF at connector end - All the solid caps on MB/VGA has only 300+UF max per cap for 16v rated due to only non-solid caps can go high capacitance.
so 4 x 285 classifieds or 4 x 5870s (soldering on an addtional connector per card if you are boosting your input)
or 6x 6 pin pcie connectors + 6x 8pin pcie connectors (via 6 REAL Lines)
2 x 8 pin cpu 2200UFx2 @ connector end
lots of molex and satas.
Ultima modifica di Hiwa : 15-12-2009 a 20:46
Ammazza che siluro. Non ho capito a che serve il manometro per la 12v, immagino qualcosa ma è troppo lungo da scrivere...![]()
era ora, quanto l' hai fatta lunga ...
i9 ready ....
![]()
![]()
"Scusate, ma se quest'anno in Texas ci avete spedito questo deficiente, vuol dire che c'è speranza per tutti?"
Qualità e potenza senza compromessi!
Adesso lo devi tirare per benino caro Hiwuccio!
Ciao Grande!
Ema
Questo alimentatore fa paura, non ci sono altri commenti da fare.
L'idea di integrare condensatori per evitare il drop direttamente sulle linee mi sembra quasi eccessiva, chissà quanto è il reale vantaggio.
Questo è proprio un cavallo di razza![]()
betaxp86
Ma alla fine ci avevo preso?
Long Live Rock & Roll
Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)