GentooPlayer - Immagini x86_64, Raspberry PI 3B/3B+, Allo SparkyUsbBridge, BeagleBone Black + Botic Driver

Pagina 30 di 103
prima
... 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 80 ... ultimo
Visualizzazione dei risultati da 291 a 300 su 1026
  1. #291
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da m_b
    no purtroppo. Però ho collegato il dac al PC server su cui c'è Hqplayer e il dac viene visto e suona

    Ma..cosa vuola dire quel Alsa backend uninitialized ? manca qualche driver? Il dac non viene riconosciuto? ...
    buh, che non riesce ad aprire qualcosa...puoi provare a installare anche networkaudiod su ubuntu e vedere se funziona...cioé entrambi sullo stesso pc

  2. #292
    pebibyte L'avatar di marcoc1712
    Registrato
    Jan 2013
    Messaggi
    5,254
    configurazione

    Predefinito

    Ti avevo fatto togliere il -C 1, se Squeezelite è attivo, non molla il dac... Rimettilo.
    Ciao, Marco.

    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."
    — E. F. Schumacher (mis-attributed to A. Einstein)
    ________________________________________________________________________________
    Autore della patch R2 per Squeezelite e del plugin C-3PO. note libere
    Logitech media Server 7.9 > miniPc + squeezelite-R2 / SB+ > "Lu Scalmentu" NOS R2R DAC by TubeOne/ AudioResearch DAC 1-20 >
    Klimo Merlino Gold TPS > DIS Interconnect > Kent Gold > Reference > Monitor Audio Studio 20 SE

  3. #293
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da marcoc1712
    Ti avevo fatto togliere il -C 1, se Squeezelite è attivo, non molla il dac... Rimettilo.
    Se é come dice Marco, stai attento ai messaggi che ti da nadr



    come vedi non sempre riesce a stoppare Squeezelite, poi la seconda volta lo stoppa.

    ma se metti il -C 1, il rpoblema non sussiste

  4. #294
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    GentooPlayerBBB

    Immagine per BeagleBone Black




    Gli ultimi tre comandi (selectkernel, selectkernel-botic, selectkernel-botic-sabre)
    Permettono rispettivamente la scelta tra
    - Kernel (senza driver botic) RT, NO RT, e varie configurazioni.
    - Kernel con driver botic RT, NO RT, e varie configurazioni.
    - kernel con driver botic-sabre32 RT, NO RT, e varie configurazioni. (che in effetti non ho capito a cosa serve e se funziona, lo compilava e l ho messo)

    es. selectkernel




    Software installati:




    Download

    Utente: root
    password: bbbroot

    Come copiare le immagini:

    Su Win e Osx si puó usare Etcher, carica direttamente il file .img.xz

    Su linux (anche una live):
    codice:
    xzcat /percoso/file.img.xz > /dev/sdX && sync
    É consigliato ridimensionare la partizione di root con gparted dopo aver copiato l'immagine
    Ultima modifica di antonellocaroli : 09-06-2020 a 06:27 Motivo: Aggiornamento

  5. #295
    pebibyte L'avatar di marcoc1712
    Registrato
    Jan 2013
    Messaggi
    5,254
    configurazione

    Predefinito

    Secondo te supporta qualcosa del genere?

    http://bbb.ieero.com/
    Ciao, Marco.

    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."
    — E. F. Schumacher (mis-attributed to A. Einstein)
    ________________________________________________________________________________
    Autore della patch R2 per Squeezelite e del plugin C-3PO. note libere
    Logitech media Server 7.9 > miniPc + squeezelite-R2 / SB+ > "Lu Scalmentu" NOS R2R DAC by TubeOne/ AudioResearch DAC 1-20 >
    Klimo Merlino Gold TPS > DIS Interconnect > Kent Gold > Reference > Monitor Audio Studio 20 SE

  6. #296
    nibble
    Registrato
    Dec 2010
    Messaggi
    93

    Predefinito

    Originariamente inviato da antonellocaroli
    Se é come dice Marco, stai attento ai messaggi che ti da nadr



    come vedi non sempre riesce a stoppare Squeezelite, poi la seconda volta lo stoppa.

    ma se metti il -C 1, il rpoblema non sussiste
    Ciao, il -C 1 lo avevo ripristinato. Oggi ho provato ad installare networkaudiod sullo stesso PC che uso come server e su cui ho installato Hqplayer. E tutto mi pare sia filato liscio. Da Hqplayer potevo selezionare solo l'uscita PCM o DOP...quindi mi viene da supporre che in genere Linux non vede il mio dac come dac cui si può inviare DSD nativo. Sbaglio?

    Per verificare se compariva di nuovo "Alsa backend uninitialized" ho rilanciato il comando "sudo nano /var/log/networkaudiod.log" e questo era vuoto.

    Lanciando il comando "sudo service networkaudiod status" ho ottenuto quanto segue

    ● networkaudiod.service - LSB: Network Audio Daemon
    Loaded: loaded (/etc/init.d/networkaudiod; generated)
    Active: active (running) since Sun 2018-10-07 14:07:03 CEST; 1h 53min ago
    Docs: man:systemd-sysv-generator(8)
    Process: 719 ExecStart=/etc/init.d/networkaudiod start (code=exited, status=0/SUCCESS)
    Tasks: 2 (limit: 4915)
    CGroup: /system.slice/networkaudiod.service
    └─796 /usr/sbin/networkaudiod -D -p

    ott 07 14:07:03 brio-System-Product-Name systemd[1]: Starting LSB: Network Audio Daemon...
    ott 07 14:07:03 brio-System-Product-Name systemd[1]: Started LSB: Network Audio Daemon.[/I]

    E qui ecco l'esito del comando TOP

    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    2956 brio 20 0 2161980 201128 75628 S 61,9 1,2 0:55.21 hqplayer
    2592 brio 20 0 1910924 291576 150292 S 5,4 1,8 1:00.31 Web Content
    1999 brio 20 0 3831204 264764 73480 S 1,1 1,6 0:36.93 gnome-shell
    796 root 10 -10 159024 10916 6096 S 0,9 0,1 0:01.52 networkaud+
    1869 brio 20 0 430236 115780 92216 S 0,9 0,7 0:20.40 Xorg
    2378 brio 20 0 2564904 340448 177088 S 0,9 2,1 0:37.20 firefox
    2618 brio 20 0 2210872 423136 99136 S 0,9 2,6 0:46.61 Web Content
    3126 brio 20 0 51324 4036 3384 R 0,6 0,0 0:00.05 top
    2883 brio 20 0 801968 37908 28732 S 0,3 0,2 0:01.66 gnome-term+
    1 root 20 0 225768 9416 6620 S 0,0 0,1 0:01.97 systemd
    2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd
    4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker/0:+
    6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 mm_percpu_+
    7 root 20 0 0 0 0 S 0,0 0,0 0:00.02 ksoftirqd/0
    8 root 20 0 0 0 0 I 0,0 0,0 0:00.67 rcu_sched
    9 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_bh
    10 root rt 0 0 0 0 S 0,0 0,0 0:00.00 migration/0


    Quindi direi che era tutto perfettamente funzionante...e senza avere il problema del gapless che avevo nella configurazione LMS - C-3PO / R2.
    Ora rimane da capire cosa non va usando come naa il PC con installato Gentoo

  7. #297
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da marcoc1712
    Secondo te supporta qualcosa del genere?

    http://bbb.ieero.com/
    Si, il kernel con driver botic é propio per quello
    Ultima modifica di antonellocaroli : 07-10-2018 a 18:02

  8. #298
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    .quindi mi viene da supporre che in genere Linux non vede il mio dac come dac cui si può inviare DSD nativo. Sbaglio?
    No, non sbagli.

    Ora rimane da capire cosa non va usando come naa il PC con installato Gentoo
    su ubuntu hai teamwiver?

  9. #299
    nibble
    Registrato
    Dec 2010
    Messaggi
    93

    Predefinito

    Non vorrei andare OT...nel caso siete autorizzati a tirarmi le orecchie

    Ma per capire ho installato sia Hqplayer sia networkaudiod sempre sullo stesso PC server sotto la partizione Win10. Funziona tutto e il dac suona a meraviglia. Se non capisco male dai seguenti log, sotto win10 vengono caricato i driver asio che consentono streaming DSD nativo, infatti sono riuscito a convertire il DSD512. Vi riporto il log per vostro parere...ma a questo punto a maggior ragione il problema è nei driver linux mancanti per il mio dac...oltre al problemino che ho con Gentoo

    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Found ASIO driver: 'Sony Headphone Amplifier Driver' (1)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Loaded ASIO driver: Sony Headphone Amplifier Driver
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO device supports DSD
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO device supports PCM
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO default format is PCM
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 44100
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 48000
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 88200
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 96000
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 176400
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 192000
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 352800
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 384000
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 705600
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 768000
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Default ASIO channels: 0 in / 2 out
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Default output channel 0: TA-ZH1ES Out 01
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO SampleFormat 18, 32-bit
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Default output channel 1: TA-ZH1ES Out 02
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 44100/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 48000/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 88200/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 96000/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 176400/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 192000/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 352800/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 384000/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 705600/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO PCM format available: 768000/32/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO DSD format available: 2822400/1/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO DSD format available: 5644800/1/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO DSD format available: 11289600/1/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO DSD format available: 22579200/1/2
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): start 11289600/1/2 [dsd]
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO format set to DSD
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO DSD buffer size is in bits
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 2822400
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 5644800
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 11289600
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Rate available: 22579200
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Default ASIO channels: 0 in / 2 out
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Default output channel 0: TA-ZH1ES Out 01
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO DSD format MSB1
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Default output channel 1: TA-ZH1ES Out 02
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Set channels: 2 (2)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Set sampling rate: 11289600 (11289600)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO channels: 0 in / 2 out
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Output channel 0: TA-ZH1ES Out 01
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Output channel 1: TA-ZH1ES Out 02
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO buffer sizes: 131072/131072/131072 granularity: 0
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Using ASIO default buffer size
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Using ASIO buffer size: 131072
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Latencies: 28185/114063
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Using ASIO output ready notifications
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO engine started at 11289.6 kHz, 2 channels, 131072 sample buffer (2 channels)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO engine running at: 11289600
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): enter streaming mode
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): leave streaming mode
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): stop
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO engine stopped
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): start 22579200/1/2 [dsd]
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Set channels: 2 (2)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Set sampling rate: 22579200 (22579200)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO channels: 0 in / 2 out
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Output channel 0: TA-ZH1ES Out 01
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Output channel 1: TA-ZH1ES Out 02
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO buffer sizes: 262144/262144/262144 granularity: 0
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Using ASIO default buffer size
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Using ASIO buffer size: 262144
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Latencies: 55859/228638
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): Using ASIO output ready notifications
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO engine started at 22579.2 kHz, 2 channels, 262144 sample buffer (2 channels)
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO engine running at: 22579200
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): enter streaming mode
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): leave streaming mode
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): stop
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): ASIO engine stopped
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): begin disconnection
    \Desktop\networkaudiod-354\x64\networkaudiod.exe] (4560): disconnected [::ffff:192.168.1.180]:50169

  10. #300
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Si esatto, in windows ti funziona il dsd nativo, in linux no

Pagina 30 di 103
prima
... 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 80 ... ultimo

Informazioni Thread

Users Browsing this Thread

Ci sono attualmente 2 utenti che stanno visualizzando questa discussione. (0 utenti e 2 ospiti)

Regole d'invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
nexthardware.com - © 2002-2022