Usb3!!!

Pagina 4 di 4
prima
1 2 3 4
Visualizzazione dei risultati da 31 a 38 su 38
  1. #31
    pebibyte L'avatar di marcoc1712
    Registrato
    Jan 2013
    Messaggi
    5,254
    configurazione

    Predefinito

    Originariamente inviato da antonellocaroli
    Attaccando una sb3 a quella porta mi sembra che viene riconosciuta come usb3

    codice:
    Bus 002 Device 002: ID 0781:5591 SanDisk Corp.
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               3.00
      bDeviceClass            0
      bDeviceSubClass         0
      bDeviceProtocol         0
      bMaxPacketSize0         9
      idVendor           0x0781 SanDisk Corp.
      idProduct          0x5591
      bcdDevice            1.00
      iManufacturer           1
      iProduct                2
      iSerial                 3
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           44
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0
        bmAttributes         0x80
          (Bus Powered)
        MaxPower              224mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           2
          bInterfaceClass         8 Mass Storage
          bInterfaceSubClass      6 SCSI
          bInterfaceProtocol     80 Bulk-Only
          iInterface              0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0400  1x 1024 bytes
            bInterval               0
            bMaxBurst               1
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0400  1x 1024 bytes
            bInterval               0
            bMaxBurst              15
    
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               3.00
      bDeviceClass            9 Hub
      bDeviceSubClass         0
      bDeviceProtocol         3
      bMaxPacketSize0         9
      idVendor           0x1d6b Linux Foundation
      idProduct          0x0003 3.0 root hub
      bcdDevice            4.06
      iManufacturer           3
      iProduct                2
      iSerial                 1
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           31
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower                0mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0004  1x 4 bytes
            bInterval              12
            bMaxBurst               0
    
    Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            9 Hub
      bDeviceSubClass         0
      bDeviceProtocol         1 Single TT
      bMaxPacketSize0        64
      idVendor           0x05e3 Genesys Logic, Inc.
      idProduct          0x0608 Hub
      bcdDevice           85.33
      iManufacturer           0
      iProduct                1
      iSerial                 0
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           25
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower              100mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0001  1x 1 bytes
            bInterval              12
    
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            9 Hub
      bDeviceSubClass         0
      bDeviceProtocol         1 Single TT
      bMaxPacketSize0        64
      idVendor           0x1d6b Linux Foundation
      idProduct          0x0002 2.0 root hub
      bcdDevice            4.06
      iManufacturer           3
      iProduct                2
      iSerial                 1
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           25
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0
        bmAttributes         0xe0
          Self Powered
          Remote Wakeup
        MaxPower                0mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           1
          bInterfaceClass         9 Hub
          bInterfaceSubClass      0
          bInterfaceProtocol      0 Full speed (or root) hub
          iInterface              0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0004  1x 4 bytes
            bInterval              12
    questo sul minipc
    Elenca il device sul BUS 002, che in effetti è quello USB3, se colleghi alla stessa porta la JLSOUND, la collega al BUS 002 o 001 ? Questo è quello che che non mi torna.
    Ciao, Marco.

    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."
    — E. F. Schumacher (mis-attributed to A. Einstein)
    ________________________________________________________________________________
    Autore della patch R2 per Squeezelite e del plugin C-3PO. note libere
    Logitech media Server 7.9 > miniPc + squeezelite-R2 / SB+ > "Lu Scalmentu" NOS R2R DAC by TubeOne/ AudioResearch DAC 1-20 >
    Klimo Merlino Gold TPS > DIS Interconnect > Kent Gold > Reference > Monitor Audio Studio 20 SE

  2. #32
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da marcoc1712
    Elenca il device sul BUS 002, che in effetti è quello USB3, se colleghi alla stessa porta la JLSOUND, la collega al BUS 002 o 001 ? Questo è quello che che non mi torna.
    001

    codice:
    Bus 001 Device 005: ID 20b1:2023 XMOS Ltd
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass          239 Miscellaneous Device
      bDeviceSubClass         2
      bDeviceProtocol         1 Interface Association
      bMaxPacketSize0        64
      idVendor           0x20b1 XMOS Ltd
    Potrebbe essere che va in compatibiltá usb2 e viene gestito dal bus 1?
    Ultima modifica di antonellocaroli : 11-10-2016 a 18:28

  3. #33
    Moderatore L'avatar di rogers
    Registrato
    Dec 2010
    Località
    Cagliari
    Messaggi
    800
    configurazione

    Predefinito

    La jlsound è usb2 e non ci piove. Per cui qualunque controller la tratta da usb2, anche quello dell'usb3, ovviamente.
    Quello che vorrei capire e se esiste sulla scheda un unico controller usb, che può gestire anche la 3.0, oppure due controller separati.

    Il controller usb3 comunque gestisce in retrocompatibilità anche la usb2.

    Alla fine però sembra che esista sulla MB un unico controller host usb3 in grado di gestire quattro 2.0 e una 3.0;
    esso attiva solo i suoi bus 2.0 (perchè la jlsound è usb2) e il bus 3.0 rimane inattivo.

  4. #34
    pebibyte L'avatar di marcoc1712
    Registrato
    Jan 2013
    Messaggi
    5,254
    configurazione

    Predefinito

    Originariamente inviato da antonellocaroli
    001

    codice:
    Bus 001 Device 005: ID 20b1:2023 XMOS Ltd
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass          239 Miscellaneous Device
      bDeviceSubClass         2
      bDeviceProtocol         1 Interface Association
      bMaxPacketSize0        64
      idVendor           0x20b1 XMOS Ltd
    Potrebbe essere che va in compatibiltá usb2 e viene gestito dal bus 1?
    Non sono un esperto, ma nella mia ignoranza supponevo ci fossero due diversi controller hw, uno USB2 ed uno USB3 (con compatibilità USB2) e che quindi l'albero dei bus e dei devices corrispondesse, succedendo quello che succede, mi pare che alla fine i bus siano solo 'logici' e probabilmente il controller hw è unico. Hai provato ad aggancare la perifericga USB3 ad una porta 'nera' la vede comunque USB3 o no?
    Ciao, Marco.

    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."
    — E. F. Schumacher (mis-attributed to A. Einstein)
    ________________________________________________________________________________
    Autore della patch R2 per Squeezelite e del plugin C-3PO. note libere
    Logitech media Server 7.9 > miniPc + squeezelite-R2 / SB+ > "Lu Scalmentu" NOS R2R DAC by TubeOne/ AudioResearch DAC 1-20 >
    Klimo Merlino Gold TPS > DIS Interconnect > Kent Gold > Reference > Monitor Audio Studio 20 SE

  5. #35
    pebibyte L'avatar di marcoc1712
    Registrato
    Jan 2013
    Messaggi
    5,254
    configurazione

    Predefinito

    Originariamente inviato da rogers
    La jlsound è usb2 e non ci piove. Per cui qualunque controller la tratta da usb2, anche quello dell'usb3, ovviamente.
    Quello che vorrei capire e se esiste sulla scheda un unico controller usb, che può gestire anche la 3.0, oppure due controller separati.

    Il controller usb3 comunque gestisce in retrocompatibilità anche la usb2.

    Alla fine però sembra che esista sulla MB un unico controller host usb3 in grado di gestire quattro 2.0 e una 3.0;
    esso attiva solo i suoi bus 2.0 (perchè la jlsound è usb2) e il bus 3.0 rimane inattivo.
    Ci siamo incorciati, ma alla fine credo anch'io sia così.
    Ciao, Marco.

    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction."
    — E. F. Schumacher (mis-attributed to A. Einstein)
    ________________________________________________________________________________
    Autore della patch R2 per Squeezelite e del plugin C-3PO. note libere
    Logitech media Server 7.9 > miniPc + squeezelite-R2 / SB+ > "Lu Scalmentu" NOS R2R DAC by TubeOne/ AudioResearch DAC 1-20 >
    Klimo Merlino Gold TPS > DIS Interconnect > Kent Gold > Reference > Monitor Audio Studio 20 SE

  6. #36
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da marcoc1712
    Hai provato ad aggancare la perifericga USB3 ad una porta 'nera' la vede comunque USB3 o no?
    eccolo
    codice:
    Bus 001 Device 006: ID 0781:5591 SanDisk Corp.
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.10
      bDeviceClass            0
      bDeviceSubClass         0
      bDeviceProtocol         0
      bMaxPacketSize0        64
      idVendor           0x0781 SanDisk Corp.

  7. #37
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da rogers
    La jlsound è usb2 e non ci piove. Per cui qualunque controller la tratta da usb2, anche quello dell'usb3, ovviamente.
    Quello che vorrei capire e se esiste sulla scheda un unico controller usb, che può gestire anche la 3.0, oppure due controller separati.

    Il controller usb3 comunque gestisce in retrocompatibilità anche la usb2.

    Alla fine però sembra che esista sulla MB un unico controller host usb3 in grado di gestire quattro 2.0 e una 3.0;
    esso attiva solo i suoi bus 2.0 (perchè la jlsound è usb2) e il bus 3.0 rimane inattivo.
    Ed é propio cosi credo

    codice:
    lspci
    00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0e)
    00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0e)
    00:13.0 SATA controller: Intel Corporation Atom Processor E3800 Series SATA AHCI Controller (rev 0e)
    00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI (rev 0e)
    00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0e)
    00:1c.0 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 1 (rev 0e)
    00:1c.1 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 2 (rev 0e)
    00:1c.2 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 3 (rev 0e)
    00:1c.3 PCI bridge: Intel Corporation Atom Processor E3800 Series PCI Express Root Port 4 (rev 0e)
    00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0e)
    00:1f.3 SMBus: Intel Corporation Atom Processor E3800 Series SMBus Controller (rev 0e)
    01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

  8. #38
    tebibyte
    Registrato
    Aug 2011
    Età
    50
    Messaggi
    2,928
    configurazione

    Predefinito

    Originariamente inviato da rogers
    @antonellocaroli
    Penso di si, usa solo i 5V. Nel caso puoi provare, al massimo non funziona
    Originariamente inviato da madman
    Provate prima senza alimentazione... potrebbe servire solo alla ricarica dei dispositivi usb collegati e non ad alimentare la scheda.

    Inviato dal mio SM-A510F utilizzando Tapatalk
    Senza alimentazione non funziona....ma solo con la 5v é ok....

Pagina 4 di 4
prima
1 2 3 4

Informazioni Thread

Users Browsing this Thread

Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)

Regole d'invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
nexthardware.com - © 2002-2022