Abit AW9D-MAX [Thread Ufficiale]

Pagina 1 di 58 1 2 3 4 5 6 7 8 9 10 11 51 ... ultimo
Visualizzazione dei risultati da 1 a 10 su 579
  1. #1
    exbibyte L'avatar di lore85bg
    Registrato
    Nov 2005
    Località
    Gandino (BG)
    Età
    38
    Messaggi
    10,142

    Predefinito Abit AW9D-MAX [Thread Ufficiale]

    Ecco 2 foto ufficiali:








    Caritteristiche della scheda:
    - CPU
    * Designed for Intel® LGA775 processors with1066/800MHz FSB
    * Supports Intel® Core™ 2 Duo(Extreme Edition) & Pentium® Extreme Edition & Pentium® D & Pentium® 4 Processors
    * Supports Intel® Hyper-Threading / XD-bit / EM64T / EIST Technology / Virtualization Technology
    * Intel® Quad Core ready.
    - Chipset
    * Intel® 975X / Intel® ICH7R Express Chipset
    - Memory
    * 4 X 240-pin DIMM sockets support max. memory capacity 8GB
    * Supports Dual channel DDR2 800/667 Un-buffered / Non-ECC memory
    - Graphics
    * Supports Dual PCI-Express X16 slots (dual ATI® CrossFire™ Graphics)
    - LAN
    * On-board Dual PCI-E Gigabit LAN controller supports 10/100/ 1000M Ethernet
    - Audio
    * abit AudioMAX™ HD 7.1 CH
    * Supports Jack Sensing and S/PDIF In/Out
    * Dolby® Master Studio Certificated
    - Expansion Slots
    * 2xPCI-EX16,2xPCI-EX1,1 xPCI, 1x AudioMAX™
    - Internal I/O Connectors
    * 1 x Floppy port, 1 x UDMA 100/66/33 connector,
    * 7 x SATA 3Gb/s connectors
    * 2 x USB 2.0 headers, 2 x IEEE1394 headers
    * 1 x FP-Audio header, 1 x CD-IN
    - Back Panel I/O
    * 1 x PS/2 Keyboard, 1 x PS/2 Mouse
    * 4 x USB 2.0, 2 x RJ-45 LAN,
    * 1 x eSATA
    - Serial ATA
    * ICH7R: 4 x SATA 3Gb/s supports Intel® Matrix Storage SATA RAID 0/1/0+1/5
    * ICH7R: Support SATA AHCI, providing native command queuing and native hot plug & play
    * Silicon Image:3132: 4 x SATA 3Gb/s, two SATA connectors of the same area can support SATA RAID 0/1
    - IEEE 1394
    * 2 ports IEEE1394a at 400 Mb/s transfer rate
    - Abit Engineered
    * abit µGuru™ Technology
    * abit AudioMAX™ HD 7.1 CH
    * abit Silent OTES™ 2 Technology
    * Quick Power & Reset Buttons
    * Back-light Blue LED's
    * Low ESR and high ripple conductive polymer aluminum solid capacitors
    - RoHS
    * RoHS Compliancy
    - Form Factor
    * ATX form factor 305 x 245mm
    * PCB Color: Black & Red


    Ecco alcune foto (i colori potrebbero non essere i defitivi!!!):











    Ecco le altre versioni:
    AW9D Fatal1ty


    AW9D



    - RECENSIONI/Pre-review

    Recensione di Bit-Tech

    Recensione di Pro Clockers

    Recensione di VR-Zone

    Recensione di Anandtech

    Recenione di Hexus

    Recensione di Viperlair

    Recensione di HardwareZone

    una preview fatta di bit-tech

    Recensione by NordicHardware

    raccolta di foto da Coolaler

    alcune caratteristiche tecniche


    BIOS AW9D-MAX

    per flashare ci sono 2 modi:

    1) in windows si può usare l'utily presente nel cd fornito con la scheda...

    2) in DOS con il classico AWDFLASH

    dopo aver creato il floppy bootable... da dos si scrive:

    A:\>awdflash [nome del bios].BIN /py /sn /cd /cp /cc /cks /R

    oppure se dopo aver estratto i files c'è anche un runme.bat nella schermata di dos dopo aver riavviato potete anche scrivete "runme" e date l'invio

    poi spegnete il pc... staccate l'alimentazione... e fate un bel clear cmos... e poi riaccendete...


    1.1 ---> ftp://ftp.abitshop.com/pub/bios/aw9d//aw9d11.zip (first release) ha già incluso awdflash...

    BETA BY COOLALER ---> http://www.iamxtreme.net/coolaler/m606c_12.b02
    dov'è possibile cambiare il molti.

    1.2 ---> ftp://ftp.abit.com.tw/pub/download/bios/aw9d/aw9d12.zip
    Release information:
    1. Recalibrate the CPU temperature.
    2. Add support the CPU multiplier adjusting function.
    3. The uGuru now works as intended when enabling the ICH7R RAID BIOS.
    4. Support the “Thermal Monitor 2” function.
    5. Remove the PCI-E clock adjusting function.
    6. BIOS compiled date: 09/15/2006

    1.3 BETA 1 ---> http://www.megaupload.com/?d=CNSGGHKC oppure http://www.hostfiles.org/download.php?id=DF3C0F59
    secondo hipro questa beta 13 datata 2006.10.11 in realtà sarebbe un alpha
    *To support Conroe-L CPUs(FSB800)
    *To support Conroe Extreme (X6800) CPU's Multiplier range from 6 to 31
    *Update CPU micro code to support Kentsfield B3 version
    *Added DRAM timing option "Refresh Cycle Time (tRFC)"
    *Wrong naming of Bios(12_B03), it should be a 13 beta BIOS 1.

    1.3 BETA 2 ---> http://xyz2007.myweb.hinet.net/aw9d_beta_13.bin

    1.3 BETA 3 ---> http://kiner-web4.myweb.hinet.net/AW9D/M606C_13.B03
    datato 22/11/2006

    1.3 BETA 4 ---> http://www.prelector.net/bios/M606C_13.B04
    datato 23/11/2006

    1.3 UFFICIALE ---> ftp://ftp.abitshop.com/pub/bios/aw9d//aw9d13.zip
    1. Supports Conroe L and Core 2 Quad Rev. B3 processors.
    2. Enhanced compatibility with certain memories.
    3. Support multiplier adjusting function for Core 2 Duo processors.
    4. Support DRAM tRFC adjusting function.
    5. BIOS compiled date: 12/12/2006

    1.3 BETA STRAP @1333 ---> http://www.lvcoyote.com/betabios9.zip

    1.4 ALFA e BETA 1 ---> http://www.lvcoyote.com/betabios10.zip
    Alpha BIOS version M606C_14.A02 Supports for native DDR2 800 memory
    Beta BIOS version M606C_14.B01 has fix Kensfiled CPU with 3DMark & Vista issue

    1.4 BETA 2 ---> link oppure link 2
    1. Enhance certain DDR2 800 memory compatibile
    2. Fixing E6850 and E6750 wrong frequency and hang up issue

    1.5 BETA ---> link 1 o link 2

    1.5 UFFICIALE ---> LINK
    1. EIST and C1E Enable/ Disable function now work as intended.
    2. Fixed an issue where the system sometimes hangs on POST code 2A.
    3. Fixed an issue where the system may not boot when installing memory on DIMM3.
    4. Enhanced overclocking ability with certain CPUs.
    5. Fixed the issue that the system hangs during Vista installation, when using a Kentsfield CPU.
    6. Enhanced compatibility with certain memories.
    7. Support E6850 and E6750.
    8. Support 1333 Strap.
    9. Support DDR2-400
    10. BIOS compiled date: 04/18/2007



    UTILITY
    uGuru ---> vers. 3.101


    Everest ultimate 3.50 trial ---> http://www.lavalys.com/products/down...?ps=UE&lang=en


    MANUALE ---> LINK

    MOD
    by Hipro ---> LINK
    by citizen_one ---> LINK

    - LINK SITO UFFICIALE
    LINK Abit AW9D-MAX
    LINK Abit AW9D
    my Waterstation rev.01 rev.02 rev.03 ~ il mio cucciolo

  2. #2
    Nexthardware Staff L'avatar di Chicco85
    Registrato
    Oct 2005
    Località
    Verona
    Età
    38
    Messaggi
    7,546
    configurazione

    Predefinito

    Molto bella davvero, speriamo si lasci cloccare da brava...

  3. #3
    Amministratore L'avatar di giampa
    Registrato
    May 2002
    Località
    Pisa
    Età
    59
    Messaggi
    23,859

    Predefinito

    farò da cavia volentieri....


    "Scusate, ma se quest'anno in Texas ci avete spedito questo deficiente, vuol dire che c'è speranza per tutti?"

  4. #4
    Nexthardware Staff L'avatar di Chicco85
    Registrato
    Oct 2005
    Località
    Verona
    Età
    38
    Messaggi
    7,546
    configurazione

    Predefinito

    Quando?

    Tra l'altro, notavo che ha il classico connettore a 4 pin per i 12 volt, contro quello a 8 pin da poco introdotto.

  5. #5
    Amministratore L'avatar di giampa
    Registrato
    May 2002
    Località
    Pisa
    Età
    59
    Messaggi
    23,859

    Predefinito

    quando sarà disponibile in Italia, non ho canali privilegiati...


    "Scusate, ma se quest'anno in Texas ci avete spedito questo deficiente, vuol dire che c'è speranza per tutti?"

  6. #6
    exbibyte L'avatar di lore85bg
    Registrato
    Nov 2005
    Località
    Gandino (BG)
    Età
    38
    Messaggi
    10,142

    Predefinito

    Originariamente inviato da giampa
    quando sarà disponibile in Italia, non ho canali privilegiati...
    fammi un fischio quando la trovi...
    my Waterstation rev.01 rev.02 rev.03 ~ il mio cucciolo

  7. #7
    Nexthardware Staff L'avatar di Chicco85
    Registrato
    Oct 2005
    Località
    Verona
    Età
    38
    Messaggi
    7,546
    configurazione

    Predefinito

    Originariamente inviato da giampa
    quando sarà disponibile in Italia, non ho canali privilegiati...
    Ok... rimango in attesa.

  8. #8
    Nexthardware Staff L'avatar di stoner
    Registrato
    Mar 2006
    Messaggi
    2,063

    Predefinito

    eccola sul sito Abit e hanno tenuto la colorazione nera

  9. #9
    tebibyte L'avatar di amd4ever
    Registrato
    Dec 2005
    Località
    Rovigo
    Età
    45
    Messaggi
    2,618
    configurazione

    Predefinito

    e si .... bella veramente .... anche se i connettori sono disposti un pò in qua e in la ...

    da provare sicuramente !!!!

    ...Chi vince è quello che crede di più nella vittoria e che ci crede fino in fondo...

  10. #10
    kibibyte L'avatar di TheNamelessOne
    Registrato
    Feb 2006
    Località
    Monza
    Messaggi
    230

    Predefinito

    è da un po che la tengo sott'occhio ma non si sa ancora niente in giro, sembra promettere bene , unico difetto che si puo trovare solo guardanbdo le foto è il solo pci...che però ad esempio per me non è un problema...magari per altri...

Pagina 1 di 58 1 2 3 4 5 6 7 8 9 10 11 51 ... ultimo

Informazioni Thread

Users Browsing this Thread

Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)

Discussioni simili

  1. Abit Aw9d-max Help !!!!
    By axlrose75 in forum -= MotherBoards =-
    Risposte: 2
    Ultimo messaggio: 30-03-2007, 18:26
  2. (VR+sped) abit aw9d-max
    By ztop in forum -= Vendite : Hardware - Software =-
    Risposte: 8
    Ultimo messaggio: 28-02-2007, 18:31
  3. Abit IN9 32X-MAX [Thread ufficiale]
    By lore85bg in forum -= MotherBoards =-
    Risposte: 34
    Ultimo messaggio: 21-02-2007, 09:58
  4. (bg+sped) Abit Aw9d-max
    By lore85bg in forum -= Vendite : Hardware - Software =-
    Risposte: 2
    Ultimo messaggio: 11-01-2007, 14:04
  5. Dubbi su Abit AW9D-Max
    By 4NG3LUS in forum -= MotherBoards =-
    Risposte: 15
    Ultimo messaggio: 28-12-2006, 14:45

Tags

Regole d'invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
nexthardware.com - © 2002-2022