passo ai 12v...

Pagina 3 di 7
prima
1 2 3 4 5 6 7 ultimo
Visualizzazione dei risultati da 21 a 30 su 61
  1. #21
    kibibyte L'avatar di aleraimondi
    Registrato
    Jun 2005
    Messaggi
    224

    Predefinito

    Originariamente inviato da amd4ever
    ti consiglio anch'io la swiftech mcp655 se vuoi restare sui 12V

    oppure una EHEIM 1250 se scegli per i 220V ....

    ottime tutte e due !
    la eheim è enorme, e poi, se ipotizziamo prenda un wb tipo il g4 con altri due block, in serie farebbe fatica no? mentre la mcp probabilmenet funzionerebbe meglio

  2. #22
    kibibyte L'avatar di bones
    Registrato
    Apr 2006
    Località
    Prato
    Età
    38
    Messaggi
    441

    Predefinito

    Originariamente inviato da aleraimondi
    na ma scusa, le leing hanno 4 metri di prevalenza, sarbbe assurdo metterle in serie no?
    beh, questo effettivamente sì, però non credo bastino 450 l/h... a meno che uno non abbia 1 solo waterblock...

    se sei a fare la spesa a questo punto ti consiglio la Swiftech... in confronto la Eheim è gigantesca ma soprattutto non ha la stessa prevalenza...

  3. #23
    kibibyte L'avatar di aleraimondi
    Registrato
    Jun 2005
    Messaggi
    224

    Predefinito

    ok, sono indeciso tra due modelli: la mcp655/dangerden d5 e la aquaxtreme 50z

    http://www.systemcooling.com/aqx-50z-01.html

    mi piace molto quest'ultima, è compatta, sembra molto robusta e dalal prove che si vedono in rete, la portata finali su un impianto sono molto simili alla mcp655. Ho letto qualche parere e chiesto un po su XS, e i commenti sembrano molto positivi

  4. #24
    Nexthardware Staff L'avatar di vkbms
    Registrato
    Jan 2005
    Età
    39
    Messaggi
    5,829

    Predefinito

    ehm....io conrinuo a sostenere al mcp655 o la d5 rispetto all'aquaextreme....

  5. #25
    kibibyte L'avatar di aleraimondi
    Registrato
    Jun 2005
    Messaggi
    224

    Predefinito

    Originariamente inviato da vkbms
    ehm....io conrinuo a sostenere al mcp655 o la d5 rispetto all'aquaextreme....
    parere personale o ci son delle motivazioni ulteriori?

  6. #26
    Nexthardware Staff L'avatar di vkbms
    Registrato
    Jan 2005
    Età
    39
    Messaggi
    5,829

    Predefinito

    AQX50Z-My second recomendation is the mcp600 or aqua extreme50z. They are the same pump as I explain further down in my guide. This pump provides the most head pressure between the D4 and itself and will also give you the best temps. Should be noted that the DDC has higher max head but is 3/8 and will provide less flow. Surprisingly enough, when this pump is run at 13.8 volts it will beat pretty much any pump on the market. It is only beaten by running two of them in series. It is quite amazing only drawing 8 watts of power. this really is the ultimate water cooling pump. Low power, high head, and great temps. Its only downside is that it is not as long lasting as some of the others. I have no real data on how long it will run for, but suffice to say that the iwaki will outilve it by a while.

    MCP655- My third recomendation is the D5/MCP655. It is a bit more powerful than the AQX50Z, but dumps appx 3 times the heat into the water. With this in mind, the MCP655 is an excelent choice for those with more powerful radiators. for users with a single 120mm fan radiator the 50Z would be the better option, but larger radiators will be able to handle the heat.



    Questo è quello che dicono su Xs....

    in parole povere...

    la mcp655 è piu potente della aquaextreme ma scarica in acqua 15w anzichè gli 8w 50z....

    sono entrambe signor pompe in termini di prestazioni e integrabilità....

    Certo....se hai un rad "importante" ti puoi permettere la 655 senza il rischio di surriscaldare troppo l'acqua....altrimenti vai di 50z....

    Spero di essermi spiegato

  7. #27
    kibibyte L'avatar di aleraimondi
    Registrato
    Jun 2005
    Messaggi
    224

    Predefinito

    Originariamente inviato da vkbms
    AQX50Z-My second recomendation is the mcp600 or aqua extreme50z. They are the same pump as I explain further down in my guide. This pump provides the most head pressure between the D4 and itself and will also give you the best temps. Should be noted that the DDC has higher max head but is 3/8 and will provide less flow. Surprisingly enough, when this pump is run at 13.8 volts it will beat pretty much any pump on the market. It is only beaten by running two of them in series. It is quite amazing only drawing 8 watts of power. this really is the ultimate water cooling pump. Low power, high head, and great temps. Its only downside is that it is not as long lasting as some of the others. I have no real data on how long it will run for, but suffice to say that the iwaki will outilve it by a while.

    MCP655- My third recomendation is the D5/MCP655. It is a bit more powerful than the AQX50Z, but dumps appx 3 times the heat into the water. With this in mind, the MCP655 is an excelent choice for those with more powerful radiators. for users with a single 120mm fan radiator the 50Z would be the better option, but larger radiators will be able to handle the heat.



    Questo è quello che dicono su Xs....

    in parole povere...

    la mcp655 è piu potente della aquaextreme ma scarica in acqua 15w anzichè gli 8w 50z....

    sono entrambe signor pompe in termini di prestazioni e integrabilità....

    Certo....se hai un rad "importante" ti puoi permettere la 655 senza il rischio di surriscaldare troppo l'acqua....altrimenti vai di 50z....

    Spero di essermi spiegato
    si le avevo lette, la prima di maxxxracer è quel mostro dell'iwaki 20d

  8. #28
    Nexthardware Staff L'avatar di vkbms
    Registrato
    Jan 2005
    Età
    39
    Messaggi
    5,829

    Predefinito

    mostro si....ma ti ci voglio a integrarla.....

  9. #29
    kibibyte L'avatar di bones
    Registrato
    Apr 2006
    Località
    Prato
    Età
    38
    Messaggi
    441

    Predefinito

    Originariamente inviato da vkbms
    AQX50Z-My second recomendation is the mcp600 or aqua extreme50z. They are the same pump as I explain further down in my guide. This pump provides the most head pressure between the D4 and itself and will also give you the best temps. Should be noted that the DDC has higher max head but is 3/8 and will provide less flow. Surprisingly enough, when this pump is run at 13.8 volts it will beat pretty much any pump on the market. It is only beaten by running two of them in series. It is quite amazing only drawing 8 watts of power. this really is the ultimate water cooling pump. Low power, high head, and great temps. Its only downside is that it is not as long lasting as some of the others. I have no real data on how long it will run for, but suffice to say that the iwaki will outilve it by a while.

    MCP655- My third recomendation is the D5/MCP655. It is a bit more powerful than the AQX50Z, but dumps appx 3 times the heat into the water. With this in mind, the MCP655 is an excelent choice for those with more powerful radiators. for users with a single 120mm fan radiator the 50Z would be the better option, but larger radiators will be able to handle the heat.



    Questo è quello che dicono su Xs....

    in parole povere...

    la mcp655 è piu potente della aquaextreme ma scarica in acqua 15w anzichè gli 8w 50z....

    sono entrambe signor pompe in termini di prestazioni e integrabilità....

    Certo....se hai un rad "importante" ti puoi permettere la 655 senza il rischio di surriscaldare troppo l'acqua....altrimenti vai di 50z....

    Spero di essermi spiegato
    La Laing DDC secondo te come si posizionerebbe in questa classifica?

  10. #30
    Nexthardware Staff L'avatar di vkbms
    Registrato
    Jan 2005
    Età
    39
    Messaggi
    5,829

    Predefinito

    la DDC è una signora pompa....nel senso che è silenziosa,piccola e affidabile....puo andare bene in circuiti corti con un solo Wb....ma di certo nn la piazzerei con lo Storm o con un Dtek.... la portata mi pare un po bassina nonostante la pressione....Mi pare perfetta x integrazioni al limite dello spazio.....


    (Guru correggetemi se sbaglio.... )

Pagina 3 di 7
prima
1 2 3 4 5 6 7 ultimo

Informazioni Thread

Users Browsing this Thread

Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)

Discussioni simili

  1. Passo al Conroe
    By Nachthymnen in forum -= Overclocking e CPU =-
    Risposte: 98
    Ultimo messaggio: 31-07-2006, 22:53
  2. Passo al p4: che mobo ?
    By lstorti in forum -= Hardware generico =-
    Risposte: 6
    Ultimo messaggio: 01-06-2002, 13:37
  3. PASSO E.......CHIUDO !!!
    By coppermine650 in forum -= La Piazza =-
    Risposte: 11
    Ultimo messaggio: 26-04-2001, 20:20
  4. Rippare i DVD: Come?? Come li passo in Divx;)?
    By jgigij in forum -= Periferiche di memorizzazione =-
    Risposte: 2
    Ultimo messaggio: 19-03-2001, 13:26
  5. passo de grado
    By Fazz in forum -= La Piazza =-
    Risposte: 0
    Ultimo messaggio: 25-01-2001, 12:43

Tags

Regole d'invio

  • Non puoi inserire discussioni
  • Non puoi inserire repliche
  • Non puoi inserire allegati
  • Non puoi modificare i tuoi messaggi
  •  
nexthardware.com - © 2002-2022