4870 x2 vmod e bios flash
ecco cosa ho trovato sul forum di OCTeamDenmark
two 50 Ohms multiturns vrs on the card
"First of the 2 Vgpu mods.
Here is the solderpad on the back of the card for the gpu at the rear of the card.
http://www.pctunerup.com/up/results/..._backLarge.jpg
http://www.pctunerup.com/up/results/...080Large-1.jpg
6And here is my own discovery the solderpad for the other gpu in front of the card on the back i dont think that others have found it and that is because it is hidden under the laquer on the print abd you have to scratch the laquer of whit a razorblade to get to the solderpad.
http://www.pctunerup.com/up/results/...086Large-2.jpg
Now we just have to solder some wires to the 2 solderpoints so here we are first the gpumod for the gpu at the back of the card.
http://www.pctunerup.com/up/results/...re097Large.jpg
http://www.pctunerup.com/up/results/...re098Large.jpg
http://www.pctunerup.com/up/results/...re099Large.jpg
And then the gpumod for the gpu at the front of the card.
http://www.pctunerup.com/up/results/...re092Large.jpg
http://www.pctunerup.com/up/results/...re093Large.jpg
And now to solder two 50 Ohms multiturns vrs on the card.
http://www.pctunerup.com/up/results/...re102Large.jpg
http://www.pctunerup.com/up/results/...re104Large.jpg
BIOS FLASH
When this is done we will flash the card with the asus top bios so we can clock the card a little further than normal.
First you have the get som files on the Inet.
http://frip.dk/riget/asus0.rar
http://frip.dk/riget/asus1.rar
The 2 Asus top bios With 900mhz core and 1000mhz mem in CCC and 790/915mhz default 3D clocks
http://www.techpowerup.com/downloads...lash_3.60.html
Atiflash for flashing the card in dos
http://dlsvr04.asus.com/pub/ASUS/vga...martDoc524.zip
Asus smartdoctor for controlling the fan and oc the card if u dont like the ATI CCC and i you want you ca use Amdgputool but then you have to set the fan after you have ocet the card
http://www.techpowerup.com/downloads/330/.html
HP tool to make your usb stick bootable
http://www.techpowerup.com/articles/...s/USBImage.zip
Boot image files for the usb stick
And a guide to flash the card
http://www.techpowerup.com/articles/...g/vidcard/34/5
atiflash -f -p 0 asus0.bin
atiflash -f -p 0 asus1.bin
what to write in atiflash to flash the card
Enjoy
"Edit" this asus bios has a more aggressive fan profile than the normal
HD4870X2"
Fonte OCTeamDenmark forum