Gli spunti che si possono trarre dall'articolo sono molti, ma lasciamo alla discrezione del lettore la valutazione di quelli che egli considera più significativi.
Per leggere l'intervista, basterà seguire il link in calce alla news.
Ma questo è un grande... :LOLgoku;
Speaking of PSU Myths published on your website, what is your opinion about modular cables today since you found them unstable? The fact is that most of the users want modular cables just to be free to remove them when they're not needed.
DD: Just because users like them doesn't make them good. The fact is that with lower wattage consumer PSUs you can probably get away using cable management because the voltage losses are relatively minor and reliability isn't critical. With higher end power supplies above 800W, it would be careless to use such a design because the voltage drop through the connectors is significant and the applications tend to be mission critical.
That sounds reasonable. This is also for example how the single 12V rail got into place. Why exactly is one 12V rail better than separate rails, and why is this not a safety issue for the user?
DD: One 12V rail is better because all of the power supply's capacity is available to the system. With a multi-rail 12V design, as much as 30% of the PSU's capacity can be trapped on under-utilized rails. For example, if one 12V rail rated at 18A is for the CPU, and the CPU only draws 8A, the remaining 10A cannot be utilized by other components in the system.
Ecc... :fumato;
Ecco come si fanno gli alimentatori... :smt023
Io è una vita che lo dico :fumato;Quote:
Originariamente inviato da Chicco85
Non facciamoci sentire da chi se ne fà una ragione :mrgreen: potrebbero offendersi :asd
wasky
lo amo solo per questa frase .....:spazmQuote:
Originariamente inviato da Chicco85
Ho letto solo quello che chicco ha quotato. Come non essere d'accordo in toto!!!