[News]ECS per Intel con DDR2 su chipset 925Xe PCIex
The Winbond W83627THF chip is used to monitor:
CPU voltage, +1.5 and +3.3 V
RPM of 3 fans
CPU and board temperatures (by the corresponding embedded sensors)
Onboard ports, sockets, and connectors
CPU socket (Socket 775)
4 x DDR2 SDRAM DIMM (up to 4 GB, grouped by channels)
1 x PCI Express x16 (with a latch)
2 x PCI Express x1
3 x PCI
Power connectors: 24-pin ATX power supply connector compatible with a regular 20-pin connector, 4-pin 12 V connector
1 x FDD
2 x IDE (Parallel ATA) – one of them is in the chipset (ICH6R), the second operates due to an additional controller (SiS180) supporting RAID 0, 1 or 0+1 with two SATA disks
6 x SATA (Serial ATA) – 4 of them are in the chipset, the other two operate due to an additional controller supporting RAID 0, 1 or 0+1 with two PATA disks
2 connectors for brackets with two additional USB (2.0) ports
Connector for the bracket with an additional FireWire port
1 x IrDA for SIR header
1 x CD/DVD audio connector
Header for the bracket with additional Audio-Outs
Connector for a chassis intrusion sensor
Headers for front panel indicators
Connector for a bracket with LPT port
EZ-Watcher connector (you can learn what it is in our article about the ECS EZ Buddie barebone-kit)
SMBus connector
5 x fan headers (3 headers are with rpm control. 2 of them are used for a fan on the north bridge heatsink and a fan on the rear panel of the mainboard; 4-pin CPU cooler header).
http://www.ecsusa.com/images/pf21.jpg
