Is there a step by step guid for dummies, any help will be highly appreciated.
What is not clear? Can you be more specific?
Yes sure, I will try to be specific. Let's start with the first step..
1) Boot from external installation and download the image file going to http://www.tophifi.it/ftp/packages/i...nux_220.img.gz (user audiolinux, password is sent by email after purchase)
What do you mean by "Boot from external installation", do you mean I turn on my Mac, press the option key and choose to boot from the Sandisk card (which is blank)?
In your case is easier, since mac is supporting command dd in terminal, you boot with your mac and download the file, you don't need to boot from an external device.
After you can follow the remaining installation steps.
«Se tu hai una mela, e io ho una mela, e ce le scambiamo, allora tu ed io abbiamo sempre una mela per uno. Ma se tu hai un'idea, ed io ho un'idea, e ce le scambiamo, allora abbiamo entrambi due idee.»
You mean as explained in step 5.
5) If, for example, the HD is /dev/sda, copy the image with
gunzip -c audiolinux_220.img.gz | dd of=/dev/sda
on Ubuntu: gunzip -c audiolinux_203.img.gz | sudo dd of=/dev/sda
(this will delete the hd, it is not necessary to format it previously)
Yes, you are right.
About etcher I am not sure it will work. For working, it should use the command dd as in my installation guide.
Etcher or Rufus in Windows cannot apply the step 6)
6) Launch gparted and extend the ext4 partition until covering the remaining part of the hard disk (this will fix also GPT size errors)
Raspberry Pi 3 only came with 1GB of RAM, do you think it's feasible for you to reduce the size of AudioLinux image significantly for running headless ramboot mode?
Ci sono attualmente 1 utenti che stanno visualizzando questa discussione. (0 utenti e 1 ospiti)