Ecco una incompatibilità che mi sta costando cara, ne potete leggere a questo indirizzo http://forum.matrox.com/mgaforum/Forum1/HTML/001502.html .
Questo che segue è il messaggio che avevo mandato alla Tyan prima di scoprire questo argomento sul forum della Matrox.
*******************************
Hello, my PC is composed by:
- case FullTower SuperMicro with (feeder?) 300W
- your matherboard S2380/Trinity K7 with BIOS ver. 1.02a
- 1 DIMM 128 MB PC-133 by SEMICOM PC58964A1
- Athlon 700 MHz with this con on the chip: AMD - A0700MPR24B A 10021591292
- Hard Disk Quantum Fireball LM 15 GB 7200 rpm 2 MB cache UDMA 66 (primary
master)
- CD writer/rewriter Philips 2x/2x/6x mod. 3610 (secondary master)
- CD reader Samsung 32x (secondary slave)
I had installed for first time a Banshee AGP video card, and the system go
correctly (only little problem resolved with AGP 4x disabled).
When I have tried to install my new video card, a Matrox G400 Single Head, I
had problem of peripheral conflict. In the property of video card, in
resources, I try problem for these memory intervals: 00000000-01FFFFFF,
00000000-00003FFF, 00000000-007FFFFF and 00000000-0000FFFF.
In the list of peripheral coflicts I try:
Memory interval 00000000-01FFFFFF used by: system board extention for BIOS
PnP
and
Memory interval 00000000-01FFFFFF used by: mother board resources.
Naturally, I can't install Matrox's driver, and for every restart of my PC I
see a window that tell my about a peripheral conflict for my video card. If
I reinstall my Banshee, I haven't problem.
I have anather little problel. When I restart frequently the PC, sometimes
it start partially and reboot for two or tree time. Now the jumpers on the
matherboard for the CPU voltage is setting on Auto. Is this the problem, I
must set it for 1,7V ?
Thanks for your help, I'm sorry for my bad English.
*****************************
Ciao, Antonio.
Rispondi quotando
